Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The No-Nonsense Lowdown on Sex Dolls Today- No Hype Just Facts
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]DISCOVER BEST SEX DOLL FEET ADVICE TODAY[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Standing feet are one of those features that customers don't think about until they need them, and then they discover the difference is vast. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. Staying away from an irritating purchase is simple enough if you comprehend the difference before you order.

Bolts or No Bolts
The basic difference couldn't be simpler. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and attempting to stand her will damage the feet. It all hinges on the bolts, with everything else following from whether they're present or not.

The Photographer's Choice
Photography and display both need standing feet. If a doll can stand unaided, full-length poses without noticeable supports are possible, as is display in a corner, a doorway or anywhere else that needs her to be upright. Non-standing feet can't match the wide range of poses and settings this opens up, and it's the main reason most photographers specify standing feet when ordering.

If You Want to Shower With Your Doll
For shower use too, standing feet are critical. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and hazardous. The standing feet give her stability in a wet environment, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. Structural failure eventually, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

Water Will Find Its Way In
Let's expand on shower use, because a lot of damaged dolls start there. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Essentially unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become visible. Anyway of your precautions, the water will find its way in, which is why a doll with non-standing feet should never be in the shower nonetheless careful you are.

Upright in a Corner, Wardrobe or Cabinet
Another upside of standing feet is easier storage in some setups. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. Space-efficient, this suits purchasers who don't have room for a hanging setup, and it's great for purchasers who want to display the doll rather than keep her hidden. Apparent and accessible storage is made possible by the standing feet, which some buyers prefer.

The Extra Cost Explained
The disadvantage of standing feet is that they're a little more expensive and slightly heavier. Expect the price to be a few percent higher than a doll with non-standing feet, as the metal bolts add a small amount of weight and the manufacturing process is more involved. The difference is small, and it's normally worth the additional cost, but it's worth knowing about if you're buying on an incredibly tight budget.

Bolts Showing When the Feet Are Bare
The bolts can show if the feet are bare, which is the other downside. Some buyers are distracted when the bolts are visible in photos of a doll in high-heeled shoes or open-toed footwear. Cover the feet with closed shoes or pick footwear that conceals the bolts and this trivial aesthetic issue is solved, so it's not a reason to avoid standing feet completely.

Fine for Bed-Only Dolls
Non-standing feet cost less and weigh less, and they suit customers who only want to use the doll in bed and won't display her standing or shower with her. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly adequate, and the savings can go on upgrades such as articulated hands or a better wig. If you know what you want, this is an entirely valid choice.

Softness as a Selling Point
There's a slight softness and flexibility to non-standing feet that some customers find more comfortable to touch. Not typically enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

A Doll That Can No Longer Stand
Forgetting what kind of feet they have, buyers attempt to stand the doll regardless, and that's the sizable risk with non-standing feet. Real damage comes of this typical slip-up, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. Purchasing non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.

If You Might Want Them Later
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. Not easily; that's the short answer. Because the bolts are embedded in the soles during manufacturing, adding them afterwards means cutting into the feet and installing new hardware, a pricey process that often doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Acquire a doll with standing feet in the first place; it's better than attempting to add them later.

Which Feet Should You Order?
Purchasers choosing between standing and non-standing feet can follow some uncomplicated useful advice. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly acceptable. Not sure? Choose standing feet: nothing is off the table with them, and the small additional cost is worth paying.

Lying Down Storage Needs More Space
Another consideration worth mentioning concerns gender. Because male dolls are heavier and more tough to store in any other way, they ordinarily get more from standing feet than female dolls do. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. Storing upright becomes possible for male dolls with standing feet, a real advantage if you don't have a lot of room.

Noticeable Hardness at the Bottom
A final note is worth making on the aesthetic difference between standing and non-standing feet. On standing feet the bottom is slightly harder thanks to the bolts, and that can show when the doll is barefoot. Less aesthetically satisfying, to some buyers, is this, particularly on dolls with fragile features, as the hard soles look slightly industrial. Non-standing feet are more natural-looking and softer, something some customers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Check Every Few Months by Gently Twisting
Maintenance is another angle that's worth considering. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out entirely the doll can collapse. A soft twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them slightly lower-maintenance in the long run.

Smooth Floors Need Extra Support
How the doll stands on distinct surfaces is also impacted by the bolts. The doll is steady on carpet, where the bolts grip well. Bolts can slip on hard flooring, particularly a silky floor, so the doll may need additional support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it avoids sliding. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

Barefoot Photos and Exact Proportions
Often overlooked, there's a final consideration in how standing feet affect the doll's overall proportions. Slightly changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. This subtle effect, typically invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. Lacking the bolts, non-standing feet steer clear of this effect and are slightly shorter and more natural-looking.

Extra Cost for Extra Options
The extra cost of standing feet is worth it for most customers, because they open up posing, display, storage and shower alternatives that non-standing feet don't; that's the bottom line. Purchasers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For all other buyers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out my explanation for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Messages In This Thread
The No-Nonsense Lowdown on Sex Dolls Today- No Hype Just Facts - by FrankJScott - 6 hours ago

Forum Jump:


Users browsing this thread: 1 Guest(s)